<img src="http://www.66infra-strat.com/79795.png?trk_user=79795&amp;trk_tit=jsdisabled&amp;trk_ref=jsdisabled&amp;trk_loc=jsdisabled" height="0px" width="0px" style="display:none;">

CREO: FUNDAMENTALS FULL - 5 DAY


COURSE OVERVIEW 
In this course you will gain a general understanding of different Creo capabilities and some of the different workflows used. The first three days are identical to the 3 day ‘Fundamentals Basic’, this course adds in some slightly more advanced part and assembly modelling along with some additional productivity tools. 

TARGET AUDIENCE 
Users with minimal Creo Parametric experience will benefit from this course. 

PREREQUISITES 

  • None

CREO: FUNDAMENTALS BASIC - 3 DAY

COURSE OVERVIEW

In this course you will gain a general understanding of different Creo capabilities and some of the different workflows used. If you just need a quick head start or have used Creo previously and just need a top up this course is ideal. If you need a more comprehensive look at Creo take a look at our 5 day version of the fundamentals. The first 3 days are the same, then adds in some slightly more advanced part and assembly modelling techniques along with some additional productivity tools.

TARGET AUDIENCE

Users with minimal Creo Parametric experience will benefit from this course.

PREREQUISITES

  • None

CREO: ADVANCED MODELLING - 1 DAY

COURSE OVERVIEW

In this course you will learn how to create complex geometry using PTC Creo Parametric advanced modelling capabilities. You will learn how to ensure design intent is kept regardless of the design created. 

TARGET AUDIENCE

Users with fundamental knowledge of Creo Parametric looking to increase efficiency.

PREREQUISITES

  • Creo Fundamentals

LEARNING OBJECTIVES

  • Review the Modelling Systems framework
  • Perform multiple edge and surface selections
  • Create advanced holes, chamfers, and rounds
  • Create profile and trajectory ribs
  • Create shell and draft features in a model
  • Create blends, swept blends, and rotational blends
  • Create helical and variable section sweeps
  • Create spinal and toroidal bends

 

CREO: ADVANCED ASSEMBLY - 3 DAY

 

COURSE OVERVIEW

In this course you will learn everything you need to know about working in the assembly environment. From assembling with kinematic connections through planning out your large assembly models.

TARGET AUDIENCE

Users with a fundamental knowledge of Creo Parametric looking to learn more about the assembly environment.

PREREQUISITES

  • Creo Fundamentals, Advanced Modelling

LEARNING OBJECTIVES INCLUDE

  • Review the Assembly Systems framework
  • Manage components within an assembly
  • Mirror components and assemblies
  • Modify assembly states
  • Create reference patterns
  • Create component interfaces
  • Manage assembly failures and interferences
  • Replace components in an assembly

 

CREO: DETAILING - 2 DAY

 

COURSE OVERVIEW

In this course you will learn in detail everything you need to know to maximise your use of the 2D environment in Creo. 2D drawing annotations such as dimensions, tolerances, notes, datum, datum targets, surface finishes, symbols and you will also cover best practice in managing large drawings to increase efficiency

TARGET AUDIENCE

Users with fundamental knowledge of Creo Parametric drawings environment.

PREREQUISITES

  • Creo Fundamentals (3 or 5 days)

LEARNING OBJECTIVES INCLUDE

  • Review the 2D Drawings framework
  • Show advanced annotations in drawings, including geometric tolerances, notes, surface finishes, and symbols
  • Create advanced annotations in drawings, including geometric tolerances, notes, surface finishes, symbols, datum targets, datums, and draft geometry
  • Manipulate annotations in drawings
  • Review the 2D Documentation Framework
  • Create drawing layers
  • Modify drawing setup and options
  • Manage large drawings efficiently
  • Use drawing representations

CREO: SURFACING - 2 DAY

 

COURSE OVERVIEW

In this course you will learn about the surface features Creo Parametric. In addition, you will learn how to create, manipulate, and analyse complex shaped surfaces.


TARGET AUDIENCE

Users with a fundamental knowledge of Creo Parametric surface modelling looking to create more complex shaped surface features.

PREREQUISITES

  • Creo Fundamentals (3 or 5 days)

LEARNING OBJECTIVES INCLUDE

  • Review the Modelling framework
  • Discuss the surface modelling overview
  • Review surface selection methods
  • Curve creation including point array, equation, composite, intersections, and trimming
  • Create extrude, revolve, and fill surfaces
  • Create sweeps and helical sweeps
  • Review the Surface Modeling framework
  • Create blend surfaces
  • Create rotational blend surfaces
  • Create boundary blend surfaces
  • Create swept blend surfaces
  • Create variable section sweep surfaces

CREO: SHEETMETAL - 1 DAY

 

COURSE OVERVIEW

In this course you will learn about creating sheetmetal models in Creo Parametric. You will learn about the sheetmetal design process that is typically used to build a sheetmetal model. You will also learn the sheetmetal features that can be used to capture your design intent for a sheetmetal models.

TARGET AUDIENCE

Users with a fundamental knowledge of Creo Parametric looking to create sheetmetal models.

PREREQUISITES

  • Creo Fundamentals (3 or 5 day)

LEARNING OBJECTIVES

  • Review the sheetmetal design process
  • Create a primary flat wall
  • Create some simple secondary walls
  • Review the Sheetmetal Design Process
  • Understand bending and unbending sheetmetal models
  • Understand sheetmetal Form features
  • Understand how to modify sheetmetal models

CREO: CABLING - 1 DAY

 

COURSE OVERVIEW

In this course you will learn about routing cables in Creo Parametric. You will learn about the cabling process typically used to prepare for, route, flatten, and document a Creo Parametric wiring harness assembly. Along with this you will learn various techniques to modify wires and cables, add harness and how to display various details in a harness drawing

TARGET AUDIENCE

Users with a fundamental knowledge of Creo Parametric looking to use Creo Cabling module.

PREREQUISITES

  • Creo Fundamentals (3 or 5 day)

LEARNING OBJECTIVES 

  • Review the Cabling Process framework
  • Understand cabling terminology
  • Route wires and cables
  • Create a flat harness
  • Create a harness drawing
  • Review the Cabling Process
  • Route and utilize networks
  • Establish logical references
  • Route wires and cables using logical data
  • Modify wire routings
  • Create harness components and cosmetics
  • Show cabling information in harness drawings

 

CREO: SIMULATE STRUCTURAL ANALYSIS - 0.5 DAY

 

COURSE OVERVIEW

In this course you will learn how to run a structural analysis using Creo Simulate. This includes defining and pre-processing the model, analysing the results, and optimizing the design.

TARGET AUDIENCE

Users with fundamental knowledge of Creo Parametric looking to increase efficiency and productivity in the tool

PREREQUISITES

  • Creo Fundamentals (3 or 5 day)


LEARNING OBJECTIVES

  • Explain the basic Structural Analysis process
  • Define structural loads
  • Define structural constraints
  • Define and run structural analyses
  • Review results

CREO: SIMULATE LIVE - 0.5 DAY

 

COURSE OVERVIEW

In this course you will utilize the power of Creo Simulation Live to create structural, thermal, modal, and fluid simulations in a realtime simulation environment.

TARGET AUDIENCE

Users with a strong knowledge of Creo Parametric looking to learn about the real-time simulation environment.

PREREQUISITES

  • Creo Fundamentals (3 or 5 day)

LEARNING OBJECTIVES

  • Explain the basic theory of FEA analysis and stress and strain
  • Create real-time simulations of the following:
    • Structural simulations
    • Thermal simulations
    • Modal simulations
    • Fluid simulations

CREO: GENERATIVE TOPOLOGY OPTIMIZATION - 0.5 DAY

 COURSE OVERVIEW

In this course you will learn about Creo Parametric’s Generative Topology Optimization (GTO) functionality. You will create, optimize, and generate the models by specifying a set of system design requirements.

TARGET AUDIENCE

Users with basic knowledge of Creo Parametric will benefit from this course. Knowledge of multibody modelling is preferred.

PREREQUISITES

  • Creo Parametric Fundamentals (3 or 5 days)

LEARNING OBJECTIVES

  • Apply the Generative Design framework in the product design
  • Using the Generative Design functionality, you will learn how to do the following:
    • Define design spaces
    • Define physics
    • Set design criteria and study settings
    • Optimize and validate the results
    • Generate design
    • Apply best practices while generating the design

CREO: ANSYS SIMULATION - 0.5 DAY

 

COURSE OVERVIEW

In this course you will use Creo Ansys Simulation to analyse models using structural, thermal, and modal studies. The simulation results will help you quickly identify and correct potential issues in the design stage.

TARGET AUDIENCE

Users with a strong knowledge of Creo Parametric looking to learn about using Creo Ansys Simulation.

PREREQUISITES

  • Creo Fundamentals Certification

LEARNING OBJECTIVES

  • Explain the workflow to perform an analysis using Creo Ansys Simulation
  • Explore the analysis capabilities of Creo Ansys Simulation
  • Perform highly accurate simulation analyses using structural, thermal, and modal studies

ILLUSTRATE: FUNDAMENTALS - 1 DAY

(Concurrent) Contact us at training@concurrent-engineering.co.uk for full details on this training course.

(Honeycomb) Contact us at training@honeycomb.ie for full details on this training course.

WINDCHILL: FUNDAMENTALS -1 DAY

 

COURSE OVERVIEW

In this course you will be introduced to Windchill's role in product lifecycle management (PLM) during the product development process. You will identify key concepts and use various methods to search and view the product data managed by Windchill. This can be run as generic course or bespoke to your set up.

TARGET AUDIENCE

  • This course is intended for new Windchill users.

PREREQUISITES

  • None

LEARNING OBJECTIVES

  • Describe the PLM scope
  • Identify Windchill concepts and capabilities
  • Use the Windchill user interface
  • Use the Windchill search capabilities
  • Use and customize the View Information user interface

WINDCHILL: BESPOKE TO YOUR REQUIREMENTS - 1 DAY

 

COURSE OVERVIEW

(Concurrent) Windchill can be used and set up in many ways. We offer a 1 day bespoke course based around your organisations usage. Contact us to discuss your requirements. Training@Concurrent-Engineering.co.uk      

(Honeycomb) Windchill can be used and set up in many ways. We offer a 1 day bespoke course based around your organisations usage. Contact us to discuss your requirements. Training@honeycomb.ie

TARGET AUDIENCE

  • This course is intended for any new Windchill users.

PREREQUISITES

  • None

LEARNING OBJECTIVES

  • To suit your requirements

WINDCHILL: FUNDAMENTALS CHANGE MANAGEMENT - 0.5 DAY

 

COURSE OVERVIEW

In this course you will define the Change Management process using Windchill PDMLink functions. You will also explain how to report problems and monitor the progress of changes. You will recognize the responsibilities of multiple roles while creating a Change Request, Change Notice, and completing and reviewing implementation tasks.

TARGET AUDIENCE

This course is designed to provide broad and basic coverage of Change Management tools to members of the Implementation team.

PREREQUISITES

  • Windchill: Fundamentals Overview
  • Windchill: Bespoke

LEARNING OBJECTIVES

  • Define the Change Management process in Windchill
  • Explain the benefits of using Change Management
  • Discuss the configuration and customization of requirements
  • Identify the various roles to create and complete tasks
  • Create and modify Change Objects
  • Describe Change Objects for the routing process
  • List all the implementation tasks
  • Describe change administrator responsibilities

WINDCHILL: FUNDAMENTALS ENGINEERING BOM - 0.5 DAY

  

COURSE OVERVIEW

In this course you will study the eBOM creation process and the Product Structure Browser (PSB) Windchill tool to create, edit, and manipulate the Product Structure. In addition, you will understand how digital End Items and WTParts make up Windchill’s product structure. Lastly, you will understand the relationship between a content item and part.

TARGET AUDIENCE

This course is intended for any user who wants to create and manage the eBOM or Product Structure in Windchill.

PREREQUISITES

  • Windchill: Fundamentals Overview

LEARNING OBJECTIVES

  • Describe how digital End Items and WTParts make up a product structure in Windchill
  • Create a baseline of a Product Structure
  • Get acquainted with the Windchill tool for creating and editing an eBOM
  • Manage part associations
  • Apply the Filter criteria to a Product Structure
  • Generate the eBOM Reports

 

WINDCHILL: CAD INTEGRATION - 1 DAY

 

COURSE OVERVIEW

In this course you will learn about the Windchill PDMLink Creo Parametric data management solution. You will review how to register the Windchill server with Creo and learn about the Creo to Windchill access points. Additionally, you will be taught about the processes of managing design data and managing design development.

TARGET AUDIENCE

This course is intended for any user who creates and modifies data using Creo Parametric. People in related roles will also benefit from taking this course.

PREREQUISITES

  • None

LEARNING OBJECTIVES

  • Describe Windchill MCAD Data Management Process overview
  • Manage design data
  • Manage Design Development
  • Manage CAD Data
  • Work with CAD Data
  • Manage Family Tables

WINDCHILL: BOM MANAGEMENT - 2 DAY

 

COURSE OVERVIEW

In this course you will complete basic Windchill MPMLink functions. You will also use MPMLink to transform eBOMs to one or more mBOMs using the BOM Transformer. Finally, you will manage manufacturing changes attributed to product development.


TARGET AUDIENCE

This course is intended for any user who wants to transform an eBOM into an mBOM and learn more about Windchill MPMLink.

PREREQUISITES

  • Windchill: Fundamentals of Engineering Bill of Materials (eBOM)

LEARNING OBJECTIVES

  • Describe MPM and Windchill MPMLink
  • Explain the Windchill MPMLink environment
  • Analyze MPMLink BOM transformation tools and concepts
  • Analyze the eBOM
  • Demonstrate restructuring the mBOM
  • Practice maintaining and conforming the mBOM
  • Configure for CAD Data and understand the CAD and WTPart Association in Windchill PDMLink
  • Demonstrate the Product Structure Browser (PSB) Data Management for CAD documents

WINDCHILL: BUSINESS ADMINISTRATION - 3 DAY

 COURSE OVERVIEW

In this course you will gain an understanding of basic Windchill business administration tasks. You will configure a Windchill instance to manage products using the specific needs of a particular business case.


TARGET AUDIENCE

This course is intended for Windchill application administrators.

PREREQUISITES

  • Windchill Fundamentals

LEARNING OBJECTIVES

  • Manage participants in Windchill
  • Describe and use Windchill contexts and folders
  • Create Windchill objects with attributes and modify object behavior
  • Configure Windchill Workflows and Lifecycles
  • Define Windchill teams and roles
  • Identify and apply Windchill domain policies and access controls
  • Summarize and use Windchill templates
  • Customize the Windchill change management and promotion processes
  • Execute security audit reports

MATHCAD: PRIME - 2 DAY

 

(Concurrent) Contact us at training@concurrent-engineering.co.uk for full details on this training course.

(Honeycomb) Contact us at training@honeycomb.ie for full details on this training course.

VUFORIA: FUNAMENTALS - 2 DAY

 

COURSE OVERVIEW

Augmented reality (AR) is an exciting industry gaining traction in various markets, from retail to manufacturing. In this course, you will get a high-level overview of this market (strategy, use cases, and development practices) and then build out two apps, one for a consumer use case and another for an industrial use case. In this project-based experience, you will set up AR projects, create AR experiences with 2D and 3D assets, setup custom logic and events, and integrate data from smart, connected products. The intent is to walk away with a strong understanding of AR development strategies and be able to make AR experiences using Vuforia Studio.


TARGET AUDIENCE

Users looking to improve their overall Vuforia knowledge.

PREREQUISITES

  • None


LEARNING OBJECTIVES

  • Describe basic AR concepts
  • Apply the tools to build AR experiences
  • Follow the DX Process to create an AR experience for a consumer and an industrial use case

KEYSHOT: FUNDAMENTALS - 1 DAY

 

(Concurrent) Contact us at training@concurrent-engineering.co.uk for full details on this training course.

(Honeycomb) Contact us at training@honeycomb.ie for full details on this training course.

 

THINGWORX: FUNDAMENTALS - 4 DAY

 

COURSE OVERVIEW

In this course you will apply the ThingWorx development process and use ThingWorx Composer to design an IoT Web based application.

TARGET AUDIENCE

Users with little to no experience with ThingWorx will benefit from this course.

PREREQUISITES

  • None

LEARNING OBJECTIVES

  • Apply the ThingWorx Development process
  • Build entities in ThingWorx Composer
  • Apply Thing Model using Things, Thing Templates, and Thing Shapes and learn how to create and use them correctly
  • Create and incorporate Services into a Thing Model
  • Represent and manage data
  • Create ThingWorx mashups using Mashup Builder
  • Identify all major connectivity technologies
  • Use ThingWorx Analytics features such as Data, Signals, Profiles, Models, and more
  • Back up and export a ThingWorx project
  • Configure ThingWorx access control